Mimosa N5-45×2 19dBi Sector Beamforming Antenna

Part: 100-00083

C$ 264.99

Guaranteed Safe Checkout

Features & Compatibility



The Mimosa N5-45×2 is the industry’s first sector antenna to deliver the best of both worlds — incredible noise rejection and long-distance performance, with wideband 4.9–6.4 GHz operation for fixed wireless broadband. The dual-slant polarization, 45º sector can be used with any third-party 2×2 MIMO radio solution, or two N5-45×2 antennas can be connected to the 4×4 MIMO Mimosa A5c access point, aimed in different directions, for 2x spectrum reuse, superior range and noise rejection at collocation and tower sites.

  • Reject Noise and Synchronize
    • Overcoming noise at tower sites is key to scaling capacity. The N5-45×2 delivers industry-leading side lobe rejection and an unprecedented 43 dB front-to-back (FTB) performance — the highest FTB ratio of any sector or horn antenna in the industry.
    • Compatible with any third-party, 2×2 MIMO radio solution, there’s no higher performance antenna in the industry.
  • Wideband Operation
    • Supporting 4.9 GHz public safety applications and multipoint licensed operation up to 6.4 GHz, where regulations allow, the N5-45×2 provides an additional800 MHz of spectrum beyond the crowded 5.15–5.85 GHz unlicensed channels.
  • Go the Distance
    • The Mimosa N5-45×2 offers the best of both worlds — a long distance, high gain sector with the superior noise isolation of a horn.
    • Competitive sectors offer high-gain, but fail to reduce side lobe and front-toback noise. Symmetric horn antennas achieve good noise isolation, but typically offer lower gain and inefficient symmetrical ground coverage patterns.
  • Compatible with Third-Party Radios
    • Blending the best of sector antennas with the best features of a horn, the Mimosa N5-45×2 is a great sector antenna choice to use with any 2×2 MIMO radio. Even better, the ultra-wide 9º vertical beamwidth covers substantially more ground than other leading sector antennas.

Key Features

  • Industry-Leading Front-to-Back Ratio for 2x Spectrum Reuse
  • World-Class Noise Rejection
  • High-Gain for Long Distances
  • Wideband 4.9–6.4 GHz Sector


  • 427 mm (16.81”) x 143 mm (6.63”) x 76 mm (3.0”) – including connectors


  • 2.81kg (6.2 lbs)

Technical Description

  • Antenna
    • Gain: 19 dBi
    • Polarization: Slant 45º
    • Azimuth Beamwidth (4 dB): 45º
    • Azimuth Beamwidth (3 dB): 42º
    • Elevation Beamwidth (3 db): 9º
    • Electrical Downtilt: 2º
    • Front-to-Back Ratio (min): 43 dB
    • Cross-Polar Isolation: >30 dB
    • Port-to-Port Isolation: >10 dB
    • Impedance: 50 Ω
    • Max Input Power: 30 dBm
  • Physical
    • RF Connectors: 2 N-type female (includes two 1 meter LMR 240 Type-N to Type-N cables)
    • RF Connectors Position: Back of antenna, near center
    • Enclosure Characteristics: Outdoor, UV stabilized, engineered polymer
    • Mounting:
      • Galvanized steel, dual attached pole mount with 20º mechanical up or down tilt. Two mounting bracketsincluded. For pole sizes, maximum is 3.5” (90 mm) and minimum is 1.5” (38 mm).
    • Wind Survivability: 200 km/h (125 mph)
    • Wind Loading: 4.77 kg @ 160 km/h (10.49 lbs @ 100 mph)
  • Environmental
    • Outdoor Ingress Protection Rating: IP55
    • Operating Temperature: -40°C to +55°C  (-40°F to 131°F)
    • Operating Humidity: 5 to 100% condensing
    • Operating Altitude: 4,420 m (14,500’) max
    • Shock & Vibration: ETS 300-019-2-4 class 4M5
  • Regulatory and Compliance
    • RoHS Compliance: Yes

Additional information



Customer Reviews


There are no reviews yet.

Be the first to review “Mimosa N5-45×2 19dBi Sector Beamforming Antenna”

Your email address will not be published. Required fields are marked *