Ubiquiti UISP SunMAX SolarSwitch SM-SW-40

Model: SM-SW-40

SunMAX SolarSwitch

Ubiquiti UISP SunMAX SolarSwitch SM-SW-40

SunMAX™ SolarSwitch™ is a remote managed MPPT 24V 7A charge controller with a built-in 4 port 24V PoE 10/100Mbps switch and one DC output delivering up to 40W. It comes with built-in weather prediction service, which together with AI algorithms will provide you with critical information about your solar site`s existing and future performance.

Features:

• Indoor or Cabinet(rack mountable) use
• PV Panel Input 10 – 60V
• 4-port 24V PoE output 10/100 switch
• 24V DC-Out Terminal
• Max output power 40W
• External 24V Battery Charging up to 7Amps (supports SLA, AGL,AGM)
• Managed by UISP controller.

* Batteries and solar panels are not included

• Dimensions: 168 x 136 x 36 mm (6.14 x 5.35 x 1.42″)
• Weight    543 g (1.2 lb)
• Enclosure Characteristics: Steel, Indoor Use
• Max. Power Consumption: 2W
• Networking Interface: (4) 10/100 Fast Ethernet Ports
• Management Interface: Ethernet + Wi-Fi (2.4 GHz)
• Button: Reset
• LEDs: System, Output
• Power Source: PV Panel (H4 connectors)
• PV Input Voltage Range: 10-60V (Reverse Protection, Surge Protection) Maximum Open Circuit Voltage 60V
• PV Maximum Current: 10A
• PV Power Control: MPPT
• Output Interfaces: 24VDC Passive PoE (Pins 4, 5+; 7, 8-) 24VDC Terminal Block
• Output Voltage: Battery Voltage Limited to 24V (Surge Protection)
• Maximum Power Output: PoE: 17W, DC OUT: 24W, Max 40W Total
• Battery Type: 24V SLA, AGM, Gel Lead Battery
• Absorption Voltage Steps: 27.4V, 28.2V, 29.1V, 30V
• Float Charge Voltage: 95% of Absorption Voltage
• Max. Charge Current: 7A
• Under Voltage Protection: 22 – 23.6V Software Configurable / 22V Hardware Protection / 2 Priority Levels for Output Disable
• Operating Temperature: -20 to 50° C (-4 to 122° F)
• Certifications: FCC/IC/CE
• Certifications: FCC, IC, CE