PRODUCT SPECIFICATIONS
The Mimosa A5 access point delivers cutting-edge multipoint technology for service providers to affordably deliver the industry’s first scalable, gigabit, wireless broadband network.
Highlights
Fiber Speed Access
- Capable of delivering the speed business users and consumers need at a fraction of the cost of delivering fiber-to-the-premise.
Network-Wide Cloud Control
- Mimosa Cloud makes deployment a breeze, interacting with devices network-wide to proactively assist the A5 to optimize network and subscriber experience for the best performance and capacity management.
Working Above the Noise
- Advanced auto-gain control techniques automatically squelch out underlying interference with only 10 dB of operating margin required to deliver incredible client performance.
Compact and Fast
- With up to 1.0 Gbps of total capacity, the A5 is the industry’s fastest multipoint solution in a tiny form factor, making suburban rooftop or urban installation a fast, easy and discrete solution.
Network Scalability Perfected
- Unique integrated, high-precision GPS Sync technology allows every deployed device to be collaboratively synchronized across the network, allowing easy channel reuse to save spectrum network-wide.
Dimensions
- 314 mm (12.36”) height x 142.44 mm (5.61”) width
Weight
- 1.75 kg (3.85 lbs)
Technical Specifications
- Features
- Gigabit Ethernet: 10/100/1000-BASE-T
- Synchronization: GPS+GLONASS allows for network-wide sync and interference avoidance
- Collocation: 1PPS GPS Tx/Rx synchronization for same tower collocation and channel reuse
- Network Processing: Advanced AP control for capacity and subscriber management
- Management Services:
- Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring
- HTTPS; HTML 5-based Web UI; 2.4 GHz 802.11b/g/n radio for local management access
- Smart Spectrum Management:
- Active scan monitors/logs ongoing RF interference across channels (no service impact)
- Dynamic auto-optimization of channel and bandwidth use
- Security:
- WPA2 PSK & Enterprise 802.1x
- Radius provisioning, COA, DM
- 128-bit AES with hardware acceleration
- VLANs:
- Per subscriber VLAN
- Q-in-Q, triple tagging
- Management VLAN
- QoS: Supports 4 pre-configured QoS levels
- GPS Location: GNSS1 (GPS + GLONASS)
- Traffic Shaping: Per CPE UL/DL commit and maximum rate shaping
- Access Control List: Permit, deny, and remark layer 2 and layer 3 traffic flows
- Performance
- Max Throughput: Up to 1.0 Gbps IP (1.7 Gbps PHY)
- Client Capacity:
- 100 clients (WiFi Interop)
- 44 clients (SRS)
- Wireless Protocols:
- WiFi Interop
- Spectrum Reuse Synchronization (SRS)
- Radio
- MIMO & Modulation: 4×4:4 MIMO OFDM up to 256-QAM
- Bandwidth**:
- 20/40/80 MHz channels tunable in 5 MHz increments for GPS Sync
- Tunable to standard WiFi channels for WiFi Interop
- **4.9 GHz uses 20 MHz channel widths (US only, regulations vary by region)
- Frequency Range:
- 4900–6400 MHz*
- * restricted by country of operation (US/FCC 5600–5650 support)
- *A5/A5c extended frequency, above 6.2 GHz, requires P/N 100-000xx-01
- 4900–6400 MHz*
- Max Output Power: 30 dBm
- Sensitivity ( MCS 0 ):
- -87 dBm @ 80 MHz
- -90 dBm @ 40 MHz
- -93 dBm @ 20 MHz
- Antenna
- Gain: 14 dBi
- Beamwidth ( 3 dB ): 70° azimuth
- Electrical Downtilt: None
- Front-to-Back Ratio: >30 dB
- Cross-Polar Isolation: >20 dB or greater
- Polarization: Circular, 4 alternating panels
- Environmental
- Outdoor Ingress Protection Rating: IP67
- Operating Temperature: -40°C to +55°C (-40°F to 131°F)
- Operating Humidity: 5 to 100% condensing
- Operating Altitude: 4,420 m (14,500’) maximum
- Shock & Vibration: ETS 300-019-2-4 class 4M5
- Physical
- Enclosure Characteristics: Outdoor UV-stabilized engineered polymer
- Wind Survivability: 200 km/h (125 mph)
- Wind Loading:
- 7.72 kg @ 160 km/h
- 17.03 lbs @ 100 mph
- Mounting: Dual-pole strap feed points integrated into metal base with integrated curvature for contact with mounting poles
- Power
- Max Power Consumption: 25 W
- System Power Method: 802.3 at compliant
- System Lightning & ESD Protection: 6 kV
- PoE Power Supply: 802.3at and Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection
- Regulatory + Compliance
- Approvals: FCC Part 15.407 and Part 90Y, IC RSS210 and RSS111, CE, ETSI 301 893/302 502
- RoHS Compliance: Yes
- Safety: UL/EC/EN/ 60950-1 + CSA-22.2
Reviews
There are no reviews yet.