MikroTik RouterBOARD RB4011iGS+5HacQ2HnD-IN (US Version)

RB4011 series – amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration.

The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.

RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.

Note: The RB4011 does not support Passive DAC modules, 1GB copper SFP modules and SFP GPON modules.

Technical Description

• Product code: RB4011iGS+5HacQ2HnD-IN
• CPU: 4 core AL21400 1.4 GHz
• Size of RAM: 1 GB
• Storage NAND: 512 MB
• 10/100/1000 Ethernet ports: 10
• SFP+ port: 1
• Switch chip model: RTL8367SB
• Wireless
  • 2.4 GHz radio
  • 5 GHz radio
• Wireless regulations Specific frequency range may be limited by country regulations
• Operating frequency
  • 2.4 GHz
    • 2412 – 2484 MHz
  • 5 GHz
    • 5150 – 5875 MHz
• Wireless interface model
  • 2.4 GHz
    • R11e-2HnD
  • 5 GHz
    • QCA-9984
• Supported protocol
  • 2.4 GHz
    • 802.11b/g/n
  • 5 GHz
    • 802.11a/n/ac
• Chains: 2 4
• Antenna beam width: 360°
• Antenna gain: 3 dBi (2 antennas dual band, 2 antennas single 5 GHz band)
• Power Jack: 1
• PoE in: Yes (port 1), passive, 18 – 57 V
• PoE out: Yes (port 10), passive, up to 57 V
• Max power consumption: 23 W without PoE out, 44 W with PoE out
• Supported input voltage: 12 V – 57 V (jack)
• Voltage Monitor: Yes
• PCB temperature monitor: Yes
• Operating temperature: -40 C ~ +45 C
• Dimensions: 228 x 120 x 30 mm
• Serial port: RJ45
• License level: 5
• Operating System: RouterOS