Ubiquiti UFiber UISP Fiber XGS-PON CPE

UISP Fiber XGS-PON CPE

An optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km.

Features:

• (1) XGS-PON optic SC/APC port
• (1) 10GbE RJ45 LAN port
• Bridge and Router Mode support
• Managed with the UISP application: Version 1.4.9 and later

_{Note. This device is only compatible with the UISP Fiber XGS OLT. It cannot be used with third-party OLTs}

Technical Description

• Mechanical
  • Dimensions: 100 x 100 x 27 mm (3.9 x 3.9 x 1.1″)
  • Weight: 220 g (0.49 lb)
  • Enclosure material: UV-stabilized polycarbonate
• Hardware
  • Networking interface:
    • (1) SC/APC, ITU-G.9807 XGSPON WAN port
    • (1) 100/1,000/2,500/5,000/10,000 MbE RJ45 LAN ports
  • Management interface:
    • Ethernet in-band
    • PON
  • Memory: 256 MB DDR
  • Onboard flash storage: 32 MB NOR
  • Max. power consumption: 8W
  • Power method: USB-C 5V DC, 3A
  • Power supply: 5V DC, 3A power adapter
  • Supported voltage range: 5V DC power adapter
  • Total non-blocking line rate:
    • Downstream: 9.95 Gbit/s
    • Upstream: 9.95 Gbit/s
  • Normal TX range of optical module: 4 to 9dBm
  • Normal RX range of optical module: -9 to -26dBm
  • Button: (1) Factory reset
  • Operating temperature: -15 to 45° C (5 to 113° F)
  • Operating humidity: 10 to 95% non-condensing
  • Certifications: CE, FCC, IC
• Fiber
  • Operating wavelength:
    • TX: 1,270nm
    • RX: 1,577nm
  • Line code: Scrambled NRZ
  • Physical reach: 20 km
• Software
  • Management application: UISP Version 1.5.7 and later