PRODUCT SPECIFICATIONS
Second-generation NFC card reader and intercom.
Features
- Unlock using an NFC card or UniFi Identity mobile app
- Doorbell for unlock with video of visitor and two-way intercom
- Video works at ADA-compliant mounting height
- PIN unlocking on the screen
- Connects to UniFi Access Hub using PoE
- IP55 rain resistance (-10 to 45° C)
Technical Description
- Mechanical
- Dimensions: 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6′)
- Weight: 136 g (4.8 oz)
- Enclosure material: Polycarbonate, glass
- Mount material: Aluminum alloy
- Mounting: Wall, gang box
- Weatherproofing: IP55
- Hardware
- Networking interface: (1) GbE RJ45 port
- Connectivity:
- BLE 4.2
- NFC
- Power method:
- PoE
- UL 294 Power-limited Class 2 PSU
- UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range: 48V DC
- Max. power consumption: 6W
- ESD/EMP protection: Air: ±15kV, contact: ±8kV
- Sensor: Proximity sensor
- Camera: 4000 x 3000, 12 MP, 30 FPS
- Microphone: Yes
- Speaker: (1) 4 ohm, 1.5W
- LEDs:
- R/G/B/W
- Flash
- Button: (1) Factory-reset
- NFC frequency: 13.56 MHz
- NFC read range: < 30 mm
- NFC standards: ISO 14443A, 14443B, 15693
- NFC technology:
- NFC Tag 1,2,3,4,5
- MIFARE Classic
- MIFAREPlus
- MIFARE Ultralight
- MIFARE DESFire
- Operating environment: Outdoor use
- Ambient operating temperature:
- Device: -30 to 45° C (-22 to 113° F)
- Display:* -10 to 45° C (14 to 113° F) (*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional.) (Effective after firmware v1.3.28)
- Ambient operating humidity: 5 to 90% non-condensing
- Software information: The software version of a product can be checked at https://unifi.ui.com
- UL 294 level:
- Destructive attack: Level I
- Line security: Level I
- Endurance: Level I
- Standby power: Level I
- UL 294 statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
- The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirements:
- Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
- The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
- CAN/ULC-60839-11-1 Grade: Grade assignment: I
- Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level: UA-G2-Pro/UA-G2-Pro-Black, V02
- LED
- System:
- Steady blue: Adopted/device is ready
- Steady white: Pending adoption
- Blinking white/blue: Upgrading firmware
- Strobing red: Emergency lockdown
- System:
- Software
- Management application: UniFi Access: Version 1.5.9 and later
Reviews
There are no reviews yet.