Cambium Outdoor Dual Radio WiFi 6 AP Sector Antenna 2×2, 2.5GbE, 48V Out, BLE. (US Version)

SKU: XV2-2T1XA00-US

C$ 1,349.12

Call for availability

Guaranteed Safe Checkout

Features & Compatibility

Cambium Networks XV2-2T1XA00-US

Outdoor Dual Radio WiFi 6 AP Sector Antenna 2×2, 2.5GbE, 48V Out, BLE. (US Version)

The XV2-2T1 Outdoor Wi-Fi 6 Access Point (AP) is based on the XV2-2T0 Outdoor AP with omnidirectional HE (high-efficiency) antenna. The XV2-2T1 has a 120-degree sector antenna built with the same HE antenna principles. Ideal for installations where the AP is mounted outside of a building or where the extra range of the sector antenna is needed. The XV2-2T1 includes a 2.5 Gb Ethernet uplink port to deliver the greater speed and capacity of Wi-Fi 6.

High-Efficiency Antenna Design

The XV2-2T1 uses a specially designed sector antenna to provide maximum and consistent RF gain in front of the AP. The high average gain delivers higher RF link budget for better client connections at greater distances than previous-generation 802.11ac outdoor Wi-Fi access points.

Flexible Deployments

Everything you need is included in the shipping box. Easily mount the XV2-2T1 to a pole or directly to the side of a building. The shipping box includes a dualpurpose mounting bracket, pole clamps, cable glands, and wall anchors. Additionally, the XV2-2T1 GE2 port provides up to 30 watts of PoE power for an external Ethernet device. Connect a Cambium Networks PMP subscriber module, a 60 GHz v1000 CN, an IP security camera, or even another access point.

Powerful Management Options

Adopt and manage the XV2-2T1 from cnMaestro™ cloud, cnMaestro on-premises, cnMaestro X, or XMS-Cloud management. The XV2-2T1 is not locked into one management option; easily move the access point from one management to the other. Whe paired with a cnMatrix™ Ethernet switch, the XV2-2T1 benefits from policy-based automation that simplifies and secures device configuration.

Wi-Fi 6 Technology Based on the IEEE 802.11ax Standard

The key value of 802.11ax is efficient use of RF spectrum. It does this by bringing MU-OFDMA from the cellular world into Wi-Fi. 802.11ax is a deterministic network where the access point is now in charge of assigning transmit resource units, time to transmit, and when to sleep to all the clients in the network. Spatial reuse is another efficiency protocol designed to increase capacity even for low-powered mobile handset devices. Support for TWT (target wait time) increases battery life, which is ideal for IOT sharing the same network. Preamble boost, longer symbols, dynamic guard interval, and dual carrier modulation (DCM) provide extended range and link stability for outdoor Wi-Fi applications.

 

Features:

  • Dual band 2.4 GHz and 5 GHz radios, 2×2 streams
  • 120° sector antenna pattern
  • 802.11ax MU-MIMO, MU-OFDMA, TWT
  • 1 x 2.5 GbE and 1 x GbE RJ45 interfaces
  • Cambium Networks™ Confidential Restricted 2
  • Up to 30 watts PoE out on GE2 port
  • Integrated BLE 4.1
  • 802.3bt or 802.3at PoE Powered Device
  • Use 802.3at PoE source for the AP if not using PoE out
  • Use 802.3bt PoE source if the AP and PoE out is used
  • IP67 rated enclosure with ambient temperature spec of -40°C to 65°C
  • LTE band filter for maximum outdoor 2.4 GHz range

SPECIFICATIONS

Specifications XV2-2T1XA00-US

Weight (6.98 lbs)
Dimensions (L x W x H) 641mm x 245mm x 172mm
(25.23 in x 9.64 in x 6.77 in)
Radio 5 GHz 802.11 a/n/ac Wave 2/ax, 2×2 2.4 GHz 802.11 b/g/n/ax, 2×2 BLE 4.1
Standard IEEE 802.11 a/ac/ax/b/d/e/g/h/i/k/n/r/u/v OFDMA, UL/DL MU-MIMO 16/64/256/1024-QAM, Каналы 20/40/80 MHz TWT, Long OFDM Symbol, Transmit beamforming, Airtime Fairness, AMSDU, AMPDU, RIFS, STBC, LDPC, MIMO Power Save, MRC, BPSK, QPSK, CCK, DSSS, OFDM, OFDMA, UL/DL MU-MIMO
Antenna Gain 5GHz 14 dBi 2.4GHz 10 dBi
Antenna pattern 120 deg
Maximum transmitter power 27 dBm
Maximum number of subscribers (associated users) 512
Max Data rates 5 GHz radio 1,201 Mbps 2.4 GHz radio 573.5Mbps
RF management Multimodal RF optimization supporting AutoCell Out-of-band RF spectrum analysis Radio self test network assurance RF monitor with chn/noise/interference Data rate pruning and minimum data rates
LTE Filter Band 38 ( 2.3GHz), 40 (2.5 GHz)
Band steering, Load balance Steers 2.4 GHz to 5GHz, RRM (Radio Resource Management)
Wi-Fi Meshing 802.11 Multi-Hop mesh
Channel Selection Multimodal channel selection with AutoChannel and AutoBand Granular control of off-channel scan and channel selection
Network and RF Management Tools Wired and wireles remote packet capture, auto logging, ZapD performance tool, rogue AP detection
Deployment ·Stand-­alone operation w/o Controller ·Cloud Managed Controller cnMaestro ·On-premise controller (NOC)
SSID ( WLAN) 16
QoS WNM
Client traffic management · Rate limit UL and DL per-client, per-WLAN · Scheduled WLAN access (time-based SSID) · Access Control Lists (IP and MAC based ACL) · DNS based Access Control ( whitelist, blacklist)
Guest Access Captive portal splash pages EasyPass guest self-registration Guest Ambassador ePSK Vouchers Client isolation per SSID, per network
Services NTP, Syslog, SNMP traps, DNS proxy
Networking L2TPv2, L2oGRE, PPPoE tunnel · LACP (802.3ad) ,TCP connection log, NAT logging firewall, · DHCP server, · L2, L3 or DNS based access control, · VLAN Pooling, RADIUS attribute VID , · VLAN per SSID per user
Hotspot Captive Portal Hosted on cnMaestro or hosted on site · AP Redirect to HTTP/RADIUS external portal/authentication · Active Directory integration, Google, Facebook, · Office 365 integration Data rate, time duration, · data throughput limit · Server DNS logging, Hotspot 2.0/Passpoint 2.0 · Credit Card Merchant billing, ePSK, Vouchers
Controller less Fast Roaming 802.11r, OKC, Enhanced roaming
Authentication WPA3, WPA2 (CCMP, AES, 802.11i), WPA2 Enterprise (802.1x/EAP), WPA PSK (TKIP), Open 802.1x EAP-SIM/AKA, EAP-PEAP, EAP-TTLS, EAP-TLS MAC authentication to local database or external RADIUS
Accounting RADIUS accounting, load balancing AAA servers, Dynamic Authorization COA, DM
Management · NMS cnMaestro Cloud, On-premises (NOC) · CLI Telnet and SSH · GUI (http, https) · SNMP v2c, v3 based monitoring
Ethernet 1 x IEEE 100/1000/2500 Mbps 1 x IEEE 10/100/1000 Mbps Ethernet with SW configurable passive PoE output of 30V or 48V up to 30 Watts
Power consumption, max 20W max Up to 50W when powering an auxiliary device
supply 802.3at powered device

Additional information

Brand

Cambiumnetworks

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Cambium Outdoor Dual Radio WiFi 6 AP Sector Antenna 2×2, 2.5GbE, 48V Out, BLE. (US Version)”

Your email address will not be published. Required fields are marked *