-
Specification
Model 24V 1.5A Output DC Voltage 24V Voltage Range 23.8V-24.2V Rated Current 0-1.5A Rated Power 36W Ripple & Noise 200mVp-p Input Voltage Range 100-240VAC Frequency Range 50 – 60Hz Overshoot at turn-on/ turn-off Any overshoot at turn on/ turn off shall be less than 110 % of rated output voltage. Full Load Efficiency(Typ.) 80% Input Current Limiting The input current should < 1.2A, under Min. AC input and full loads. Inrush current ≤50A Protection Overshoot at turn-on/ turn-off Any overshoot at turn on or turn off shall be less than 110 % of rated output voltage. Short Circuit An output short circuit will automatically enter the protected status .The power supply will protect without damage to overseers of to the unit (components, connectors, etc) under the protection of process. Overshoot at turn-on/ turn-off Any overshoot at turn on/ turn off shall be less than 110 % of rated output voltage. Over Voltage Min 11.5V, Max 12.5V Input Current Limiting The input current should < 1.2A, under Min. AC input and full loads. Over Current The power supply shall meet the limitation requirement Min 3.2A, Max 3.8A without any damage, the unit shall recover the function after the protection is removed. Over Voltage Min 11.5V, Max 12.5V Over Temperature 100°C±10°Cshut down o/p voltage, re-power on to recover Hold up Time ≥10mS at 100Vac, the output loading should be set up with full load during the test. Start up Time ≤3S at 100Vac, the output loading should be set up withfull load during the test. Environment Burn-in and Life test RS shall discuss with customer to maker sure the power in house Burn-In and life test procedures. Working TEMP.,Humidity 0~+40°C,20~85%RH Storage TEMP.,Humidity -20~+75°C,10~90%RH. Reliability MTBF no less than 10000 hours (25 °C, Full load and rated voltage input, MIL-HDBK-217F) Insulation Resistance Primary to Secondary: 10 Meg. Ohms min. 500VDC . Primary to P.G: 10 Meg. Ohms min. 500VDC Safety Requirement Dielectric Strength Primary to Secondary: 1500VAC, < 5mA, 3s Withstand Voltage I/P-O/P:1.5KVAC Standard CE ,FCC Mark,Meet IEC60950,EN55022 standard requirement
Adapter 24V US PIN
Adapter-24V-US-PIN
C$ 0.00
Guaranteed Safe Checkout
Features & Compatibility
Additional information
Customer Reviews
Related Products
Reviews
There are no reviews yet.