PRODUCT SPECIFICATIONS
Enterprise-grade access hub with entry and exit control up to eight doors and battery backup support.
- (8) Lock terminals (12V or Dry)
- (8+8) Inputs for request-to-exit devices and door position sensors
- (8) PoE ports for Access Readers
- (4) AUX terminals for chimes, sirens, or door openers
- (1) Battery backup input (32–48V)
Technical Description
- Mechanical
- Dimensions: 379 x 355 x 105 mm (15 x 14 x 4.1″)
- Weight: Device: 9.1 kg (20 lb)
- Mount: 624 g (1.4 lb)
- Enclosure material: SGCC housing with PC cover
- Mounting material: SGCC wall mount plate
- Hardware
- Networking interface: (10) 10/100/1000 Base-T
- Power method:
- Universal input, 100–240V AC, Max. 4.4A, 50/60Hz
- 32–48V DC Lead Acid Battery, Max. 7.5A @32V
- Power supply: AC/DC, internal
- Max. power consumption: 240W
- PoE interface: (8) PoE (Pins 1, 2+; 3, 6-)
- Voltage range PoE mode: 44–57V DC
- Total available PoE: 60W
- Max. PoE wattage per port: 15.4W
- LEDs:
- System: white/blue
- Output relays: steady white
- Ethernet: flashing white
- Button: (1) Factory-reset
- Digital input:
- (8) Inputs for request-to-exit devices
- (8) Inputs for door position sensors
- (1) Emergency
- Dry output relay:
- (8) Lock terminals (12V or Dry)
- (4) AUX terminals for advanced setup (Chime/Siren/Door opener)
- Powered output relay:
- Lock: 12V DC, 1A/ Dry
- Aux: Dry only
- Operating environment: Indoor use only
- Ambient operating temperature: 0 to 40° C (32 to 104° F)
- Ambient operating humidity: 5 to 95% noncondensing
- Software information: The software version of a product can be checked at https://unifi.ui.com
- UL 294 level:
- Destructive attack: Level I
- Line security: Level I
- Endurance: Level I
- Standby power: Level I
- UL 294 statement:
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
- The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirements:
- Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
- The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
- CAN/ULC-60839-11-1 Grade: Grade assignment: I
- Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level: EAH-8, Ver 01
- LED
- System:
- Steady blue: adopted, device is ready
- Steady white: pending adoption
- Blinking white/blue: upgrading firmware
- Breathing white: system initiating
- System:
- Software
- Management application: UniFi Access: Version 1.22.17 and later
Reviews
There are no reviews yet.